supply plastic injection table mold
1.Our company specializes in plastic injection molding as well as mould making and product assembly.
2. We can produce any part, big or small, perform post processing, assembly or packaging according to the customer requirement.
3.We can use your existing mould or produce one in our factory. With 18 years of experience we can handle any of your projects.
4. We can also assist you with the particular design of your product and subsequently produce it by plastic injection molding.
5.processing methods: processing with supplied drawings
6.standard or nonstandard: we both process standard and nonstandard forgings.
7.we can serve sample before big order.
8.we can reproduce if quality is not good.
9.after sale service: all the casting will be checked strictly, if the defects are found, we will produce new ones or make it for back order.
plastic injection table Mold
mold base material
S136,45#,P20,718,2738, SH136, SKD61 et
Yudo / Mastip / HASCO/DME/MOLD-MASTER Hot runner or Cold runner
Side gate, Sub gate, Pin point gate, Edge gate etc
Heat treatment and Nitriding,polish ect.
rapid injection mold : 5,000-50000pcs, normal mold : 500,000- 1,000,000pcs.
CAE Moldflow,UG,PROE,CAD etc
Mold Specification checking
3D CMM, Projector
mold making equipment
CNC machines, EDM-cuting machines, EDM machines , drilling machines, polishing machines, Grinding machines ..ect
5-15 working days
according to customer's requirement.
1. Q: What’s the MOQ (minimum order quantity)?
A: One piece.
2. Q: What’s the best FOB price?
A: Our price is made as per your drawing specification as well as the purchasing quantity.
3. Q: What’s the lead time?
A: Normally, it takes around 30 days.
4. Q: What’s the payment term?
A: FOB Ningbo, paid by T/T,. We will ask for down payment before production, and the balance paid off before shipment. Of course, we may also negotiate it.
5. Q: What kind of packing can you provide?
A: Tailor-made packaging method according to customer's requirement, otherwise, we will make the sea-worthy packing.
6. Q: Which countries have you exported?
A: Germany, Denmark, Spain, Holland, Italy, Japan, America, etc.
Service and quality information:
7. Q: Can you make as per custom drawing?
A: Yes, we can do that.
8. Q: If I don’t have drawing, what can you do for me?
A: If you don’t have drawing, but have the sample part, you may send us. We will check if we can make it or not.
9.Q: Can you supply my logo or part number on the parts?
A:Yes, we can. Please provide sample or drawing.
We make the commitment of service as below:
1.Lead time: 1-5 working days
2.Design period: 1-5 working days
3.Email reply: within 24 hours
4.Quotation: within 2 working days
5.Customer complaints: reply within 12 hours
6.Phone call service: 24H/7D/365D
7.Spare parts: 30%, 50%, 100%, according to specific requirement
8.Free sample: according to specific requirement
2.MOLD Plastic Mould Quality Control
We have good QC system.
1. Mould Material Q/C
- Mould Steel Checking (Hardness, flaw detection)
- Mould Standard Spare Parts Checking (hardness, size, flaw checking)
2. Mould Making Process Q/C
- design checking (part design, mould design, mould engineering drawing)
- each part of mould’s size checking after machining according to 2D drawing
- mould testing (check mould running condition)
3. Check with customer’s requirement again before mould shipping.
Anti-rust oil is painted first, then plastic film, and finally wooden case.
Sent together with the mould:
a) Mould manual instruction
b) Engineering drawing in flash disk
c) One more set of mould spare parts: heater, ejector pin, bush, water nozzle, water pipe, hanging ring.
4.MOLD--What we need for mould quote?
1) 2D or 3D product drawing, or pictures with detailed size, or samples
2) Mould steel raw material you require or mould life
3) Mould cavity No.
4) Hot runner or cold runner, if hot runner, tell me brand of hot runner you require
5) material of the product
Q:Are you a factory or trading company?
A:We are a factory.There are 4,000 square meters of manufacturing plants in our factory.
Q:Where is your factory located?
A:Our factory is located in Huangyan,Taizhou,Zhejiang,China.We warmly welcome all our clients domestic or abroad to visit us.
Q:What's the equipment in your factory？
A:High Speed Milling Machine,CNC Milling Machine, Drilling Machine, Grinding Machine, Wire Cutting Machine, EDM, Gas auxiliary Machine, Nitrogen Equipment and 6 set 160T-1800T injection machines etc.
Contact with me:
Mobile: +0086 137 3620 6058
Wechat/whatsapp : +0086 137 3620 6058