plastic table mould /molds
1. Mould steel: P20
2. Cavity: 1 cavity
3. Runner: Cold or Hot runner
4. Mould life: 500,000~1million shots
5.Shaping Mode: Plastic Injection Mould
We are leading plastic mould manufacture in China. Have many years experience to produce plastic moulds for injection moulding.We produce Chair Mould,Bucket Mould,Painting Bucket Mould,Stool Mould,Table Mould,Box Mould,Cup Mould,Basket Mould,Plastic House Mould,PET Testing Tube Mould,Thin wall High Speed Injection Mould,Plastic laundry basket mould,Crate Mould,Pallet Mould,Plastic Soap Box Mold and other more plastic injection moulds. We adopt CAD/CAM/CAE to design all the mould,our moulds are produced with our advanced machine and our strict quality management.
In-time response on Email, telephone calls or fax
In-time supply the quotation and mould designs
In-time communication on the technical points
In-time sending pictures for the mould machining progress and mould finishing schedule
In-time mould test and sample delivery
In-time mould deliverys
plastic table mould
45# 50# 718 2738 P20 S136 etc
500,000 ~1million shots
40% of deposit by L/C T/T 60% of balance by L/C T/T
depends on customers' demand
Procedure of mould making
place the order & receive the down payment
Design and make the drawing( products& moulds)
Customer check & confirm
Steel material purchase
Machine process(CNC, sparking machine, boring machine) & mould makers install
Send the samples to check
Receive the balance & mould shipment
Different plastic table mould we make before
We make the commitment of service as below:
1.Lead time: 1-5 working days
2.Design period: 1-5 working days
3.Email reply: within 24 hours
4.Quotation: within 2 working days
5.Customer complaints: reply within 12 hours
6.Phone call service: 24H/7D/365D
7.Spare parts: 30%, 50%, 100%, according to specific requirement
8.Free sample: according to specific requirement
2.MOLD Plastic Mould Quality Control
We have good QC system.
1. Mould Material Q/C
- Mould Steel Checking (Hardness, flaw detection)
- Mould Standard Spare Parts Checking (hardness, size, flaw checking)
2. Mould Making Process Q/C
- design checking (part design, mould design, mould engineering drawing)
- each part of mould’s size checking after machining according to 2D drawing
- mould testing (check mould running condition)
3. Check with customer’s requirement again before mould shipping.
Anti-rust oil is painted first, then plastic film, and finally wooden case.
Sent together with the mould:
a) Mould manual instruction
b) Engineering drawing in flash disk
c) One more set of mould spare parts: heater, ejector pin, bush, water nozzle, water pipe, hanging ring.
4.MOLD--What we need for mould quote?
1) 2D or 3D product drawing, or pictures with detailed size, or samples
2) Mould steel raw material you require or mould life
3) Mould cavity No.
4) Hot runner or cold runner, if hot runner, tell me brand of hot runner you require
5) material of the product
Q:Are you a factory or trading company?
A:We are a factory.There are 4,000 square meters of manufacturing plants in our factory.
Q:Where is your factory located?
A:Our factory is located in Huangyan,Taizhou,Zhejiang,China.We warmly welcome all our clients domestic or abroad to visit us.
Q:What's the equipment in your factory？
A:High Speed Milling Machine,CNC Milling Machine, Drilling Machine, Grinding Machine, Wire Cutting Machine, EDM, Gas auxiliary Machine, Nitrogen Equipment and 6 set 160T-1800T injection machines etc.
Contact with me:
Mobile: +0086 137 3620 6058
Wechat/whatsapp : +0086 137 3620 6058